회원가입/수정 MY Page 장바구니 주문조회
 
 
비밀번호 확인 닫기
전동자동차 > 1/10 전동버기 > XRAY > [한정특가] [360004] XRAY XB4 - 2017 SPECS - 4WD 1/10 ELECTRIC OFF-ROAD CAR
전동자동차
[한정특가] [360004] XRAY XB4 - 2017 SPECS - 4WD 1/10 ELECTRIC OFF-ROAD CAR
1대 한정이벤트 상품
제조회사 : XRAY
소비자가 : 698,000
판매가격 : 555,000원
총 상품 금액 0
     
 
      
상품 상세 설명
 

 




XRAY XB4’17


2017 All-new:

  • New independent servo mount
  • New rear graphite chassis brace
  • New front shock tower
  • New Delrin® shock pistons
  • New shorter shock springs
  • New hard suspension arms
  • New hard caster blocks
  • New hard rear uprights
  • New 12mm hex hubs
  • New front & rear 12mm wheels
  • New Velcro® closures for dust-free body mounting

General:

  • Designed for highest performance at all levels of racing
  • Engineered with attention to smallest details
  • Manufactured with legendary artistic craftsmanship from premium European materials
  • EFRA, ROAR, FEMCA spec compliant for stock and modified racing
  • Super easy to build, set up, maintain, and drive
  • Developed, designed and styled by Dipl. Eng. Juraj Hudy, manufactured exclusively by XRAY in Europe in the world's most sophisticated RC manufacturing facility
  • Revolutionary off-road platform with new benchmark for premium quality, reliability and performance
  • Premium XRAY service & support

Chassis:

  • Smarter chassis weight balancing options allow the motor mount and center diff assembly to move frontwards or backwards
  • Unique XRAY Multi-FlexTM technology for easy chassis flex adjustment
  • Swiss 7075 T6 hardcoated 2.0mm aluminum chassis with countersunk holes for flush, smooth underside
  • Tough composite side guards perfectly fit the chassis to seal against dirt and protect from side impacts
  • Compact electronics plate allows for mounting the speed controller for quick & easy removal and assembly
  • Graphite front, central & rear upper decks independent from chassis flex adjustment and work only as part of the front, central, and rear diff assemblies
  • Composite & graphite chassis braces for fine-tuning of the chassis flex
  • Independent servo mount allows the steering servo to be mounted to the chassis without touching it, ensuring the elimination of unwanted chassis tweak and improvement of overall traction
  • Two different battery straps short -or- long included. The long battery strap allows battery pack to be installed either frontwards or rearwards
  • Battery foam back spacer ensures the battery pack will not fall out
  • Thick 3.5mm graphite front shock tower & 3.0mm rear shock tower with multiple shock mounting and roll center positions
  • Extra robust front & rear bulkheads allow access to the differentials using only 4 screws

Differentials & Drivetrain:

  • Front & rear gear differentials with adjustable oil viscosity, featuring 35T crown steel gears and 14T steel pinion gears
  • Molded front & rear gear differentials for super-smooth, maintenance-free operation, features long-lifespan HUDY Spring Steel™ outdrives
  • Innovative aluminum motor mount allows frontwards or rearwards motor position for weight balance adjustment
  • Motor eccentric mounting plate inserts into an integrated motor holder/drivetrain support, allowing quick & easy motor rotation for gear mesh and secure clamping with a single screw
  • Robust central slip-adjustable clutch with 81T main spur gear molded from exclusive secret blend of composite material
  • Internal 1:2.5 drive ratio
  • 3-pad slipper clutch with ultra-efficient SLS material for more efficient & precise slip adjustment, and HUDY Spring Steel™ hardened outdrives for extra lifespan and reliability
  • Constant velocity drives (CVD) are manufactured from special HUDY Spring Steel for reduced weight and increased durability. The shafts are hand ground for maximum precision
  • Safety collars for all CVD drive shafts to keep mounting pins securely in place
  • Ultra-lightweight 12mm wheel hex drive hubs CNC-machined from Swiss 7075 T6 and additionally black-coated have ultra-true hex clamping design which ensures solid mounting of the wheel
  • Optional 14mm offset wheel hex drive hubs available for super-fine track-width adjustment: -0.75mm, 0mm, +0.75mm and 12mm optional wheel hex drive hubs: -0.75mm, +0.75mm, +1.5mm, +2.25mm, +3.00mm, +3.75mm, +4.5mm
  • Full set of 22 high-speed, blue-sealed ball-bearings used throughout the drivetrain to ensure maximum efficiency, degreased and oiled with Aero Shell® Fluid 12 for maximum smoothness and long life

Suspension:

  • Swiss 7075 T6 aluminum suspension holders front and rear
  • Integrated Suspension Settings (I.S.S.) for quick & easy suspension geometry setting using eccentric bushings inserted into aluminum suspension holders
  • Specially-designed suspension components manufactured from carefully formulated custom composite mixtures to ensure proper flex and durability
  • Race-perfected suspension geometry for superior performance and versatility in all racing conditions.
  • Lightweight 1-piece caster blocks with preset 9° caster with easy adjustable roll center position featuring larger openings for quick and easy disassembly of CVDs; optional 6° & 12° caster blocks available
  • Front chassis feature pre-angled caster of 8° and with the variable I.S.S. settings a range 16~20° of total caster can be achieved
  • Tiny yet robust steering blocks molded from a special composite mixture for maximum strength featuring adjustable lower roll center.
  • Very compact 0° toe-in rear uprights feature 3 different upper roll center positions, staggered inner/outer bearing sizes for improved load support and unsprung weight, and wheelbase adjustability via included shims
  • Oversized outer bearings in uprights to for increased dynamic loads
  • HUDY Spring SteelTM material for turnbuckles (featuring a tougher core) is used for front & rear upright linkages, steering system, and servo saver
  • Anti-roll bars manufactured from special spring steel material to stabilize the car at both front and rear are mounted to the diff cases & can be easily adjusted via linkages; laser-engraved markings for easy identification, available in different sizes for fine-tuning

 

Steering:

  • Simple, effective dual-arm steering system with integrated adjustable servo saver ensures perfect steering and easy Ackermann and bump steer adjustment

Shocks:

  • Consistent, reliable membrane-free big-bore shocks with bleed-screw shock cap design feature up-stop shock rod travel adjustment (via O-rings) and downstop adjustment (via shims under pistons)
  • Swiss 7075 T6 aluminum shock bodies, lower nut & bleeder shock caps are hard coated
  • Super-precise molded Delrin™ pistons are offered with 2-hole design & hole diameters 1.6mm and 1.7mm for precise shock adjustment; for custom adjustment, a set of blank pistons (no holes) are also included
  • Shock rods are machined from a special steel material, precision hand-ground for maximum smooth operation and additionally hardened for increased lifetime
  • Shock springs are shorter to allow more fine ride height adjustment; manually measured, selected and matched into pairs to guarantee equal length and damping characteristics; laser engraved for easy identification. Two types of spring sets are included in the kit.
  • Full line of linear -or- progressive shock springs available
  • Premium silicone oils laboratory tested and calibrated to ensure highest possible consistency and quality

Bumper, Body, Wheels:

  • Strong composite rear wing holder
  • Front lower bumper protrudes from the bottom of the chassis to absorb all impacts from contact between the chassis and the track surface
  • Beefy 6mm thick body posts from special composite material for maximum strength
  • High-downforce XB4 body is high-performance, low-profile, and aerodynamic to perfectly fit the XB4 layout, with front window and top roof flow channels for proper air flow, and side downforce areas and top central rib for higher stability
  • Specially designed 12mm hex hub wheels for high-competition racing; featuring reinforcement ribs to eliminate deformation and molded from very flexible material to retain shape even after impacts

Assembly, Set-up & Support:

  • Premium 3D full-color Instruction Manual & supplementary sheets
  • To fully understand the set-up possibilities we recommend the legendary HUDY Set-up Book which is loaded with over 40 pages of high-quality pictures and easy-to-read RC car set-up explanations
  • Exclusive Virtual Online Setup Sheet database with thousands of set-up sheets for race tracks around the world
  • Premium, unmatched XRAY online support

Adjustment Possibilities:

  • Fully-adjustable front and rear suspension geometry: caster, camber, toe, kick-up, anti-squat, ride height, downstops, track-width, roll center, wheelbase, roll centers, Multi-Flex™
  • Adjustable front & rear gear differential action (via oil viscosity)
  • Adjustable slipper clutch
  • Adjustable HUDY Sprint Steel™ turnbuckles (steering, front & rear upper links)
  • Multiple upper & lower shock mounting locations at front & rear
  • Adjustable Ackermann and bumpsteer
  • Adjustable front & rear anti-roll bars
  • Chassis pre-drilled holes for weight balance adjustment

Dimensions

Class:

1/10 electric 4WD off-road car

Width:

Adjustable 245-250mm

Length:

350 mm

Wheelbase:

Adjustable 279-281 mm

Weight:

850 g

Ready-to-run weight:

1650 g

Chassis

Chassis:

CNC-machined Swiss 7075 T6 aluminum 2.0mm

Front upper deck:

Machined 2.0 mm laminated carbon graphite

Suspension

Suspension:

Adjustable suspension via Integrated Suspension System I.S.S.

Rear suspension:

Lower arm with adjustable upper camber link

Front suspension:

Lower arm with adjustable upper camber link and with 9° caster blocks

Rear upright:

Composite 0° toe-in with dual arm mounting and 3 roll center positions

Shocks:

Big bore membrane free shock absorbers with Delrin pistons

Shock towers:

Machined 3.5 & 3.0 mm laminated carbon graphite (front & rear) with multiple shock mounting and camber link roll center positions

Drivetrain

Type:

Full-time shaft-drive 4WD

Primary:

Pinion / spur

Drive shafts:

HUDY Spring Steel™ CVD drive shafts

Central shafts:

HUDY Spring Steel™ Direct Connection Shafts™

Differentials:

Sealed gear differential, 6 gear, silicone-filled

Slipper clutch:

Adjustable 3-Pad

Bearings:

Rubber-sealed high-speed bearings

Gearing

Primary ratio:

1:2.5

Differential pinion:

14T front / rear

Differential crown gear:

35T front / rear

Spur gear:

81T

Motor pinion:

Not included

Geometry

Camber:

Adjustable front + rear

Front Caster:

9° static +7~11° caster in chassis = 16°~20° total caster range

Optional 6° static +7~11° caster in chassis = 13°~17° total caster range

Optional 12° static +7~11° caster in chassis = 19°~23° total caster range

Toe-in:

Adjustable front + rear

Downstops:

Adjustable front + rear

Front kick-up:

Adjustable 7° ~ 11°

Rear anti-squat:

Adjustable 1° ~ 5°

Anti-roll bars:

1.3mm front / 1.2mm rear

Ackermann:

Adjustable

Bump steer:

Adjustable

Steering:

Centrally-positioned dual steering system

Body, Tires, Wheels & Misc

Body:

XRAY XB4 body wide V2

Tires:

Not included

Wheels:

XRAY Aerodisk 14mm Wheel hex hub

Adjustment Possibilities

Standard adjustment:

Camber, toe-in, caster, track width, wheelbase, kick-up, anti-squat, roll center, Ackermann, bump steer

Instructions:

Full-color manual with 3D graphics (40 pages)

Set-up book:

Not included. HUDY 2-color off-road set-up book (40 pages) can be downloaded in the “Download section“ and it shows 1/8 off-road models in photographs contained within it. However, the methodology and set-up theory are the same for all modern 1/10 off-road cars.

Packaging:

Carton box with vinyl bags with parts

Additionally included

HUDY Graphite Grease, Silicone Oils, Authentication Certificate, Parts list & Exploded view, Decals

Items Not Included

Radio system (transmitter and receiver), steering servo, motor, pinion gear, LiPo battery packs, speed controller, charger, tires, inserts, double-sided tape, CA glue, bearing oil, medium-grade (blue) threadlock, universal tool for all nuts and turnbuckles and other tools

 
1. 구입금액이 50,000원 이상일 경우 무료배송이 적용되며, 50,000원 미만일 경우 배송비를 고객님께서 부담 하셔야 합니다.
2. KGB택배 배송료 : 2,500원(제주,도서/산간지역은 추가 배송료가 적용됩니다.)
3. 평일(월~금) 오후 4시 및 토요일 오후 12시까지 입금확인이 되는 주문은 당일 발송해 드립니다.
4. 배송기간은 입금확인일로부터 평일기준 1~2일 소요됩니다. (도서/산간지역은 배송이 지연 될수도 있습니다.)
1. 고객님께서 취소하신 상품에 대한 환불은 현금의 경우 반품 확인 후 고객님이 요청하신 통장으로 입금하여 드립니다.
2. 신용카드로 결제하신 경우 신용카드의 거래승인을 취소하여 드립니다.
3. 반품을 하시는 경우 구입하신 상품과 행사제품을 함께 보내시거나, 행사제품에 대해 해당되는 일정금액을 부담하셔야 합니다.
1. 상품수령 후 7일 이내에 반품및 A/S가능
2. 제품의 하자 및 주문내역과 다른 상품이 배송된 경우 반품 및 교환 배송요금은 판매자가 부담.
3. 고객 변심으로 인한 반품 및 교환시에는 배송비를 부담하셔야 합니다
상품 성격상 사용 여부의 확인이 불가능한 제품은 교환 및 환불이 불가능합니다.
4. 조립 제품으로 조립을 시작한 경우나 밀폐된 포장을 개봉한 경우,또는 상품 가치가 상실된 경우에는 상품불량 이라도 반품 및 교환이 불가하니 조립 또는 개봉전 반드시 확인 하시기 바랍니다.
1. 상품의 불량에 의한 반품, 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은 소비자분쟁해결기준(공정거래위원회 고시)에 따라 받으실 수 있습니다.
2. 대금 환불 및 환불 지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의 소비자 보호에 관한 법률에 따라 처리합니다.
 
 
 
상품 사용 후기
 
이름 : 첨부 : 파일첨부
내용 :
평점
 
 
 
회사소개     |     장바구니     |     주문조회     |     MYPAGE     |     자료실     |     이용약관     |     개인정보 보호정책     |     이용안내