회원가입/수정 MY Page 장바구니 주문조회
 
 
비밀번호 확인 닫기
전동자동차 > 1/10 전동트럭 > XRAY > [320201] XRAY XT2 - 2018 SPECS - 2WD 1/10 ELECTRIC STADIUM TRUCK (Carpet & Dirt)
전동자동차
[320201] XRAY XT2 - 2018 SPECS - 2WD 1/10 ELECTRIC STADIUM TRUCK (Carpet & Dirt)
제조회사 : XRAY
판매가격 : 490,000원
적립금액 : 4,900원
총 상품 금액 0
     
   
상품 상세 설명
 

 











XRAY XT2
1/10 LUXURY STADIUM TRUCK 2WD

2018 All-new

  • Recent EOS Champion and USA Champion platform
  • All-in-one concept includes specific parts to build the XT2 for particular track conditions on either Carpet or Dirt:

- Both types of gearboxes and motor plates allowing positioning of the motor in lower position (Carpet) or upper position (Dirt)

- Gear differential (Carpet) and ball differential (Dirt)

- Two different hardness of suspension arms: medium (Dirt), hard (Carpet)

- Two different rear shock towers: composite (Carpet), graphite (Dirt)

- Both types of composite battery straps to fit two different gear boxes

- Both types of composite mounts for upper brace to fit two different gear boxes

- Composite gear cover to protect the gear box from dirt

  • New shorter front composite chassis front brace allows mounting of new graphite side guard brace to adjust front chassis flex
  • New graphite chassis side guard brace for increased stability and performance
  • New secure steering linkage mounting increases reliability of the steering assembly
  • New shock absorber lower shims give more precise shock shaft movement
  • New shock absorber O-rings for better sealing and shock performance
  • New suspension pin washers prevent the suspension pins from coming out, increasing reliability

General

  • Recent EOS Champion and USA Champion platform
  • All-in-one concept includes specific parts to build the XT2 for particular track conditions on either Carpet or Dirt:
  • Both types of gearboxes and motor plates allowing positioning of the motor in lower position (Carpet Edition) or upper position (Dirt Edition)
  • Gear differential (Carpet Edition) and ball differential (Dirt Edition) included
  • Based on the ultra-successful XB2 platform
  • Full compatibility and interchangeable parts
  • Designed for highest performance at all levels of racing
  • Engineered with attention to smallest details
  • Manufactured with legendary artistic craftsmanship from premium European materials
  • EFRA, ROAR, FEMCA spec compliant
  • Super easy to build, set up, maintain, and drive
  • Developed, designed, and styled by European Champion Martin Bayer and Dipl. Eng. Juraj Hudy, manufactured exclusively by XRAY in Europe in the world's most sophisticated RC manufacturing facility
  • Setting the new benchmark for premium quality, reliability and performance
  • Premium XRAY service & support

Chassis

  • Optimal chassis weight distribution & balance
  • Both types of gearboxes and motor plates allowing positioning of the motor in lower position (Carpet Edition) or upper position (Dirt Edition)Unique XRAY Multi-Flex™ technology for easy chassis flex adjustment
  • Swiss 7075 T6 hardcoated 2.0mm aluminum chassis: lightweight, strong, rigid
  • Electronics layout allows for moving the batteries frontwards/rearwards, as well as using standard or mid-size servos and either using saddle pack or short pack batteries
  • Composite side guards are an integral part of the XT2 Multi-Flex™ system
  • Shorter front composite chassis front brace allows mounting of new graphite side guard brace to adjust front chassis flex
  • Custom-designed front lower chassis brace, available in medium and hard hardness for specific track conditions
  • Front protection bumper
  • Custom-designed upper deck, available in medium and hard hardness for specific track conditions
  • Swiss 7075 T6 aluminum motor plate
  • Both types of composite battery straps to fit two different gear boxes with foam spacer
  • Lightweight, strong composite shock towers with multiple shock mounting positions (Carpet Edition) & graphite rear shock tower (Dirt Edition)
  • Pre-drilled centerline holes for easy balancing with the HUDY Chassis Balancing Tool #107880

Drivetrain& Differentials:

  • Conventional gear-driven 2WD off-road stadium truck
  • Unique gear box, Gear Box and Motor Plate with lowered top shaft, forward-shifted motor for improved steering and handling on higher-traction surfaces
  • Included rear gear differential with adjustable oil viscosity, 53T gear & internal satellite gears (Carpet Edition)
  • Included externally-adjustable ball differential, 53T gear & axial bearings (Dirt Edition)36T (Carpet Edition) & 25T (Dirt Edition) graphite composite idler gears
  • 20T super-lightweight Swiss 7075 T6 hardcoated aluminum top shaft
  • Robust slip-adjustable clutch with 81T main spur gear molded from exclusive secret blend of composite material
  • 3-pad slipper clutch with ultra-efficient SLS material for more efficient & precise slip adjustment, and HUDY Spring Steel™ hardened outdrives for extra lifespan and reliability
  • Constant velocity drives (CVD) are manufactured from special HUDY Spring Steel™ for reduced weight and increased durability
  • Ultra-lightweight 12mm wheel hex drive hubs CNC-machined from Swiss 7075 T6 and additionally black-coated have ultra-true hex clamping design which ensures solid mounting of the wheel
  • Full set of 22 high-speed, blue-sealed ball-bearings are used throughout the drivetrain to ensure maximum efficiency, degreased and oiled with AeroShell® Fluid 12 for maximum smoothness and long life

Suspension

  • Integrated Suspension Settings (I.S.S.) for quick & easy suspension geometry setting using eccentric bushings inserted into Swiss 7075 T6 aluminum suspension holders
  • Specially-designed suspension components manufactured from carefully formulated custom composite mixtures to ensure proper flex and durability
  • Race-perfected suspension geometry for superior performance and versatility in all racing conditions.
  • Suspension arms are available in medium, hard and graphite hardness for specific track conditions
  • Suspension parts: steering blocks, caster blocks and uprights are available in medium and hard hardness for specific track conditions
  • Lower composite arm mount with integrated 26° kick-up angle; optional aluminum and brass arm mounts available
  • Lightweight, rigid caster blocks can achieve different overall caster angles using included caster bushings
  • Tiny yet tough steering blocks comprised of composite steering blocks + graphite Ackermann extensions
  • Adjustable weight balance & wheelbase via included shims on outer suspension pins
  • Compact rear uprights with 0° toe and 6 different upper roll center positions
  • HUDY Spring Steel™ material for turnbuckles (featuring a tougher core) is used for front & rear upright linkages, and steering system.
  • Front anti-roll bar manufactured from special spring steel material to stabilize the car at front is mounted to the front body mount & can be easily adjusted via linkages; laser-engraved markings for easy identification, available in different sizes for fine-tuning
  • Optionally available rear anti-roll bar set to stabilize the rear of the car; easily adjusted via linkages; laser-engraved markings for easy identification, available in different sizes for fine-tuning
  • Suspension pin washers prevent the suspension pins from coming out, increasing reliability

Steering

  • Simple yet effective dual-arm steering system
  • Secure steering linkage mounting increases reliability of the steering assembly
  • Fully bearing-equipped with 8 high-speed ball-bearings for very precise steering
  • Easily-adjustable Ackermann by quickly changing the steering link mounting positions on the steering plate
  • Bump steer adjustment for more aggression
  • Ackermann adjustment via included shims or using various graphite extension plates on steering blocks

Shocks

  • Consistent, reliable, membrane-free shocks with bleed-screw shock cap design feature up-stop & downstop adjustment via shims (under shock collar, and under pistons, respectively)
  • Swiss 7075 T6 aluminum shock bodies, lower nut & bleeder shock caps
  • Super-precise molded Delrin™ pistons are offered with 2-hole & different diameters (1.6mm & 1.7mm) for precise shock adjustment, for custom adjustment, a set of blank pistons (no holes) are also included
  • Shock rods are machined from a special steel material, precision hand-ground for maximum smooth operation and additionally hardened for increased lifespan
  • Premium shock springs designed specifically to complement the XT2 shocks; manually measured, selected and matched into pairs to guarantee equal length and damping characteristics; laser engraved for easy identification
  • Full line of linear -or- progressive shock springs available
  • Premium silicone oils laboratory tested and calibrated to ensure highest possible consistency and quality

Body, Wings, Wheels:

  • High-downforce, low-profile aerodynamic Lexan™ body designed to perfectly fit the XT2, features high-downforce areas (including front window and top roof flow channels) for proper air flow, and side downforce areas for higher stability.
  • Tough composite side guards feature double-sided Velcro™ tape to seal the body perfectly to the chassis and seal against dirt.
  • Effective rear wing was designed to work perfectly with the XRAY XT2 body. Made from strong Lexan™ material, the wing is supported on the wing mounts by extra flat shims to better support and extend the life of the wing.
  • Specially designed 12mm hex hub wheels for high-competition racing; featuring reinforcement ribs to eliminate deformation and molded from very flexible material to retain shape even after impacts (available as option only)

Assembly, Set-up & Support:

  • Premium 3D full-color Instruction Manual & supplementary sheets
  • To fully understand the set-up possibilities we recommend the legendary HUDY Set-up Book which is loaded with over 40 pages of high-quality pictures and easy-to-read RC car set-up explanations
  • Exclusive Virtual Online Setup Sheet database with thousands of set-up sheets for race tracks around the world
  • Premium, unmatched XRAY online support


Adjustment Possibilities:

  • Fully-adjustable front and rear suspension geometry: caster, camber, rear toe, kick-up, anti-squat, ride height, downstops, track-width, roll center, wheelbase, Multi-Flex™
  • Adjustable rear differential action
  • Adjustable slipper clutch
  • Adjustable HUDY Sprint Steel™ turnbuckles (steering, front & rear upper links)
  • Multiple upper & lower shock mounting locations at front & rear
  • Adjustable Ackermann and bumpsteer
  • Adjustable front anti-roll bar
  • Optional adjustable rear anti-roll bar
  • Chassis pre-drilled holes for weight balance adjustment


Dimensions

Class:

1/10 electric 2WD off-road stadium truck

Width:

Adjustable 313-319mm

Length:

319mm (420 with wing)

Wheelbase:

Adjustable 289-294mm

Weight:

920g

Ready-to-run weight:

1900g


Chassis

Chassis:

CNC-machined Swiss 7075 T6 aluminum 2mm

Front upper deck:

Hard composite


Suspension

Suspension:

Adjustable suspension via Integrated Suspension System I.S.S.

Rear suspension:

Lower arm with adjustable upper camber link

Front suspension:

Lower arm with adjustable upper camber link and with adjustable caster 0°, 2.5° and 5°

Rear upright:

Composite 0° toe-in with dual arm mounting and 7 roll center positions

Shocks:

Membrane free shock absorbers with Delrin pistons

Shock towers:

Composite front and rear shock towers include multiple shock positions (Carpet Edition) & Graphite rear shock tower (Dirt Edition)


Drivetrain

Type:

2WD

Primary:

Pinion / spur

Drive shafts:

HUDY Spring Steel™ CVD drive shafts

Differential:

Sealed gear differential, 6 gear, silicone-filled (Carpet Edition)

Hard coated ball differential (Dirt Edition)

Slipper clutch:

Adjustable 3-Pad

Bearings:

Rubber-sealed high-speed bearings


Gearing

Primary ratio:

1:2.65

Gear Box gear:

36T (Carpet Edition) & 25T (Dirt Edition)

Differential pulley:

53T

Spur gear:

81T (75T, 78T, 84T & 87T option)

Motor pinion:

Not included


Geometry

Camber:

Adjustable front + rear

Front Caster:

26° static + caster in caster block = 26°, 28.5°, 31° total caster range

Toe-in:

Adjustable front + rear

Downstops:

Adjustable front + rear

Front kick-up:

Adjustable 26°~31°

Rear anti-squat:

Adjustable 0°~4°

Anti-roll bars:

Front – 1.4mm (1.2mm, 1.6mm & 1.8mm option only)

Rear - 1.0mm to 2.0mm (option only)

Ackermann:

Adjustable

Bump steer:

Adjustable

Steering:

Centrally-positioned dual steering system


Body, Tires, Wheels & Misc

Body:

XRAY XT2 body

Tires:

Not included

Wheels:

Not included - XRAY Aerodisk 12mm Wheel hex hub (option only)


Adjustment Possibilities

Standard adjustment:

Camber, toe-in, caster, track width, wheelbase, kick-up, anti-squat, roll center, Ackermann, bump steer

Instructions:

Full-color manual with 3D graphics (40 pages)

Set-up book:

Not included. HUDY 2-color off-road set-up book (40 pages) can be downloaded in the Download section and it shows 1/8 off-road models in photographs contained within it. However, the methodology and set-up theory are the same for all modern 1/10 off-road cars.

Packaging:

Carton box with vinyl bags with parts

Additionally included

HUDY Graphite Grease, Silicone Oils, Authentication Certificate, Parts list & Exploded view, Decals


Items Not Included

Radio system (transmitter and receiver), steering servo, motor, pinion gear, LiPo battery packs, speed controller, charger, wheels, tires, inserts, double-sided tape, CA glue, bearing oil, medium-grade (blue) threadlock, universal tool for all nuts and turnbuckles and other tools

 
1. 구입금액이 50,000원 이상일 경우 무료배송이 적용되며, 50,000원 미만일 경우 배송비를 고객님께서 부담 하셔야 합니다.
2. KGB택배 배송료 : 2,500원(제주,도서/산간지역은 추가 배송료가 적용됩니다.)
3. 평일(월~금) 오후 4시 및 토요일 오후 12시까지 입금확인이 되는 주문은 당일 발송해 드립니다.
4. 배송기간은 입금확인일로부터 평일기준 1~2일 소요됩니다. (도서/산간지역은 배송이 지연 될수도 있습니다.)
1. 고객님께서 취소하신 상품에 대한 환불은 현금의 경우 반품 확인 후 고객님이 요청하신 통장으로 입금하여 드립니다.
2. 신용카드로 결제하신 경우 신용카드의 거래승인을 취소하여 드립니다.
3. 반품을 하시는 경우 구입하신 상품과 행사제품을 함께 보내시거나, 행사제품에 대해 해당되는 일정금액을 부담하셔야 합니다.
1. 상품수령 후 7일 이내에 반품및 A/S가능
2. 제품의 하자 및 주문내역과 다른 상품이 배송된 경우 반품 및 교환 배송요금은 판매자가 부담.
3. 고객 변심으로 인한 반품 및 교환시에는 배송비를 부담하셔야 합니다
상품 성격상 사용 여부의 확인이 불가능한 제품은 교환 및 환불이 불가능합니다.
4. 조립 제품으로 조립을 시작한 경우나 밀폐된 포장을 개봉한 경우,또는 상품 가치가 상실된 경우에는 상품불량 이라도 반품 및 교환이 불가하니 조립 또는 개봉전 반드시 확인 하시기 바랍니다.
1. 상품의 불량에 의한 반품, 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은 소비자분쟁해결기준(공정거래위원회 고시)에 따라 받으실 수 있습니다.
2. 대금 환불 및 환불 지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의 소비자 보호에 관한 법률에 따라 처리합니다.
 
 
 
상품 사용 후기
 
이름 : 첨부 : 파일첨부
내용 :
평점
 
 
 
 
상품 QNA
 
상품에 대해 궁금한 점을 해결해 드립니다.
번호 제목 작성자 작성일 조회
 
 
회사소개     |     장바구니     |     주문조회     |     MYPAGE     |     자료실     |     이용약관     |     개인정보 보호정책     |     이용안내