회원가입/수정 MY Page 장바구니 주문조회
 
 
비밀번호 확인 닫기
전동자동차 > 전동퓨어/F-1 > SERPENT > [410007] Serpent S120 PRO 2wd 1/12 (#410007)
전동자동차
[410007] Serpent S120 PRO 2wd 1/12 (#410007)
제조회사 : SERPENT
판매가격 : 448,000원
적립금액 : 4,480원
총 상품 금액 0
     
   
상품 상세 설명
 

 


> Serpent S120 PRO 2wd 1/12 (#410007)

Description · News (1) · Specifications · Images (58) · Downloads (2) · Spares (91) · Optionals (28) · Setups (1)

Brand: 
Serpent

Product Type: 
Electric Cars > 1/12 pan

The S120 pro is a revolutionary innovative 1/12th scale car design based on the F110 SF4.


> Specifications

General:Serpent S120 pro 1/12thscale electric 190mm rc car
:
Dimensions:



> Downloads

10-07-19Manual S120 PRO10 MBDownload
25-06-19Ref guide S120 PRO18 KBDownload




> Description

The S120 pro is a revolutionary innovative 1/12th scale car design based on the F110 SF4.



New innovative design for the rear pod with side bearings in linear guides replacing the sidelinks. With a traditional sidelink design, designers use long side links to have the relative roll movement between pod and chassis as linear as possible. But no matter how long the links are, there is always a longitudinal component in the roll motion. With the new side-bearing design, the roll motion is completely linear and independent thus the cornering is completely independent from accelerating or braking. While it doesn’t change much on the mid corner handling of the car, this gives an unprecedented consistency and stability at corner entry when the braking and steering input overlaps and at corner exit when the throttle is applied before the steering is completely straight.

What you feel is, you can brake harder into the corners and accelerate earlier out of corners.

Lipo longitudinal or Lipo transversal with narrow chassis design. The new side bearing design opens the possibility to use both inline

And cross lipo orientation while keeping a narrow chassis design.


Special holders for inline lipo configuration included in the kit, optional for lipo cross configuration

Full strength topdeck to prevent longitudinal flex and keep torsional flex on a reasonable level. 2 body mount positions are included. It does not need to be removed to exchange the lipo in any configuration

1-screw Lipo mount in all lipo orientations. For the inline lipo orientation, the lipo is held by an aluminium holder that can be removed though the chassis bottom.

For the transversal lipo orientation, the lipo can be pulled through the side. This is possible thanks to the no-link design. No more excuses not to charge the lipo in the car.

The easy to work on and strong front suspension from the F110 SF4 is evolved for the pancar specific demands. All screws are easily accessible.

Servomount is adjustable to fit every servo on the correct possition.

Double short tube system for the rear roll damping. Compared to a single tube design, it gives a 100% symmetric driving feel.
The tubes also work as roll limiter, which reduces the risk of dirt getting into the tubes or oil leaking out from them.


New ultra-low center of gravity rear pod. The angled rear plate gives torsional stiffness, protecting the rear shaft and bearings, while keeping all masses low in the pod. This increases rear grip of the car, and preventing grip roll in high grip conditions.

The bulkheads are completely redesigned to keep masses as low as possible and at the same time have a strong pod that survives rather hard crashes

The rear shaft mount is completely new and innovative. Ride height and wheelbase can be adjusted very precise with shims.

New ball diff with an additional long-life thrust bearing that runs very smooth and still allows a strong locking effect to outperform todays bevel gear diffs on most surfaces

Rear carbon shaft with variable diameter. 
The carbon shaft is reinforced by an aluminium sleve at the bearing and where the pin connects the aluminium thread insert with the shaft. This makes the shaft one of the strongest on the market.
With the bigger (8mm) bearing on the right side also helps with the higher load of the right side bearing because of the bigger leverage and the spur gear.


The thread insert goes all through the shaft until the pin, so the tension force of the thread does not pull on the gluing.

Pod Bulkheads completely keyed to the graphite plates to avoid tweak issues

New improved shocks, much easier to build, with same, bigger piston diameter as the Project 4X, and the Project 4X bleeding hole for easy rebound adjustment

After the huge success of the F110 SF4, The step to develop a 1/12th scale car on the same platform was logical. The focus was to make the car easy to work on and durable without sacrificing performance.


We proudly present another Masterpiece of innovation and performance.
Enjoy the assembly and feel the difference at the racetrack.

General
Serpent S120 pro 1/12thscale  electric 190mm rc car
Rear wheel drive, kingpin front suspension, rear pod direct drive motor (not included)


Dimensions
Trackwidth front 168mm Trackwidth rear 169.5mm (adjustable with shims)


Wheelbase 202mm
Rear adjustable range +2mm (shims)
Front adjustable range +3mm (inserts in 0.6mm steps)


Chassis

Symmetrical chassisplate for even flex and torsion in high quality carbonfiber with big cutouts for lowest possible electronics positioning and low weight


Front topdeck/Radioplate


carbon fiber radio plate which also serves as front topdeck, eliminating the need for a separate floating servomount
Battery/electronics layout


the car is consequently optimized for 2s shorty lipo use.
The battery can be used in inline and cross configuration. In inline configurateion the electronics get placed besides the battery. This is mainly recommended for stock class racing with low power and small footprint ESCs to maximize cornerspeed
For cross configuration there is a electronic holder available to mount the electornics in the center in front of the battery. This configuration optimizes forward and braking traction and gives more space for bigger ESCs used in midified racing.
Battery-holder inline


Alu battery holder with lowered battery position for lowest possible center of mass and highest cornerspeed.
Battery can be removed from the car with only one screw. No more excuses not to charge the battery in a lipo bag.
The battery can be addached to the battery holder with battery tape or velcro tape or it can just lay loose in the tray.


Battery-holder cross

The battery holder can be opened with one single screw and the battery can be removed and replaced on the side. This works to the left and to the right and gives total freedom for electronic placement.
new bigbore shocks


The shock internals are optimized to use a bigger diameter piston while using the same springs compared to the previous S120 versions.
The shock seal cartridge and piston are the same easy to use system as in the 4x evo.


A bleeding hole in the bottom which is closed by tightening the lower balljointmakes rebound setting as easy as never before


threaded shocknut with o-ring for safe and easy preload adjustment

Front and rear adjustable wheelbase.


Front wheelbase and caster adjusted with inserts with a tight tolerance to keep all settings even in hard crashes
Front suspenssion is very lightweight and extremly durable at the same time by matched component flex characteristics
Suspension front


Kingpin suspension with fixed lower arm and upper wishbone with turnbuckle for easy camber adjustment and double adjustable ackermann geometry
Steeringblocks 
Strong composite steeringblocks with 2 Ackermann positions,  The  steeringblocks feature inserts, which allow to change the kingpin inclination (inwards or outwards) to adjust the camber on high steering angles and the rollcenter at low steering angles
Suspension geometry is not influenced by wheelbase changes


The servomount in the fixed front arm ensures exceptional precise steering response. Longitudinal and torsional flex don't influence the steering.

Pod
all structural pod parts are keyed for easy and precise pod part alignment
Rear shaft holders are designed to change ride height and wheelbase with shims
Improved balldiff with additional one-piece thrust bearing for easy setting and increased durability
Ball diff with 18 balls included for better durability in high power applications
Super strong and lightweight hollow carbon Rear shaft with different diameter left to right to compensate different impact loads on both sides and still keep the weight low

 
1. 구입금액이 50,000원 이상일 경우 무료배송이 적용되며, 50,000원 미만일 경우 배송비를 고객님께서 부담 하셔야 합니다.
2. KGB택배 배송료 : 2,500원(제주,도서/산간지역은 추가 배송료가 적용됩니다.)
3. 평일(월~금) 오후 4시 및 토요일 오후 12시까지 입금확인이 되는 주문은 당일 발송해 드립니다.
4. 배송기간은 입금확인일로부터 평일기준 1~2일 소요됩니다. (도서/산간지역은 배송이 지연 될수도 있습니다.)
1. 고객님께서 취소하신 상품에 대한 환불은 현금의 경우 반품 확인 후 고객님이 요청하신 통장으로 입금하여 드립니다.
2. 신용카드로 결제하신 경우 신용카드의 거래승인을 취소하여 드립니다.
3. 반품을 하시는 경우 구입하신 상품과 행사제품을 함께 보내시거나, 행사제품에 대해 해당되는 일정금액을 부담하셔야 합니다.
1. 상품수령 후 7일 이내에 반품및 A/S가능
2. 제품의 하자 및 주문내역과 다른 상품이 배송된 경우 반품 및 교환 배송요금은 판매자가 부담.
3. 고객 변심으로 인한 반품 및 교환시에는 배송비를 부담하셔야 합니다
상품 성격상 사용 여부의 확인이 불가능한 제품은 교환 및 환불이 불가능합니다.
4. 조립 제품으로 조립을 시작한 경우나 밀폐된 포장을 개봉한 경우,또는 상품 가치가 상실된 경우에는 상품불량 이라도 반품 및 교환이 불가하니 조립 또는 개봉전 반드시 확인 하시기 바랍니다.
1. 상품의 불량에 의한 반품, 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은 소비자분쟁해결기준(공정거래위원회 고시)에 따라 받으실 수 있습니다.
2. 대금 환불 및 환불 지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의 소비자 보호에 관한 법률에 따라 처리합니다.
 
 
 
상품 사용 후기
 
이름 : 첨부 : 파일첨부
내용 :
평점
 
 
 
 
상품 QNA
 
상품에 대해 궁금한 점을 해결해 드립니다.
번호 제목 작성자 작성일 조회
 
 
회사소개     |     장바구니     |     주문조회     |     MYPAGE     |     자료실     |     이용약관     |     개인정보 보호정책     |     이용안내