Description
The Hobbywing XR10 Justock G3 Sensored Brushless ESC/SD G2.1 Motor Combo has
been designed with fixed, 0¡Æ, timing for spec class racing. The included SD G2.1
motor is an ideal stock motor for both 1/10 and 1/12 on and off-road racing.
These two components paired together make for an ideal choice for beginners and
experts alike.
Features
ESC: Built-in
polarity protection. The XR10 Justock has integrated MOSFET's that if the
battery terminals are connected in reverse, the MOSFET will be reverse-biased
and will not allow current to flow through the system Programmable
via OTA Bluetooth module or 3in1 program box Built-in
capacitor module eliminates the need for external capacitors and unwanted
space RPM
speed limit function supports up to 6 different speed, RPM, selections to meet
the needs and demands of various competitions in the world (Set through OTA
module or 3in1 box) Internal
ESC timing has been set to 0 degrees and cannot be adjusted for stock racing Built-in
BEC can support a maximum output current of up to 8A. Output voltage can be set
between 6V or 7.4V Calibration
or preforming a factory-reset can be achieved by using this SET button. Simple
and easy to use Supports
both CCW (counterclockwise) and CW (clockwise) motor directions Protection
functions include: reverse polarity, battery voltage, ESC temperature, motor
temperature, signal lost and locked rotor protection Supports
ESC firmware upgrades User-friendly
and convenient for set-up
Motor: Use
of a heat-resistant magnet attached aluminum case and double insulated windings,
high precision bearings, and rotor with a strong structure guarantees
outstanding performance and super durability Built-in
Hall sensor non-adjustable end bell combined with a high precision and balanced
rotor guarantees the user a smooth and linear power on demand Silicon
O-ring seal fitted between the end bell and stator helps to conduct inner heat
to the motor case and prevent dust from entering the HALL sensor Detachable
structure design for daily cleaning and maintenance can effectively prolong the
service life of this Justock motor and improve its operating efficiency This
Justock motor is applicable to various 1/10th, 1/12th on-road & off-road
vehicles. It can be an ideal choice for Stock or Sport class races but can also
be a nice choice for newbies for practice The
motor design is in compliance with IFMAR, and ROAR specifications
Specifications ESC: Continuous
Current: 60A Burst
Current: 380A Battery:
2S Lipo (Only 2S) Built-in
BEC: 6V/7.4V @ 4A(Switch-mode) ESC
programming: Independent programming port Motor
Supported: Sensor and sensorless brushless motor Motor
Limit: 10.5T, or greater, 3650 Motor Application:
1/10, 1/12 On-road and Off-road Cooling
Fan: Powered by BEC Size:
40.9x33.9x32.1mm (LxWxH) Weight:
75.4g (Including weight of wire)
Motor: Scale:
1/10, 1/12 Brushless:
Yes Sensored:
Yes Pole
Count: 2 KV
Rating: 3200 LiPo
Cells: 2-3S No-Load
Current(A): 4 Outer
Diameter: 35.9mm (1.413") Length:
52.5mm (2.067") Shaft
Diameter: 3.17mm (0.125") Weight:
175g (6.17oz) Timing:
Fixed
Includes: (1)
Justock G3 ESC (1)
Justock 13.5t G2.1 brushless motor (1)
5V cooling fan (1)
Sensor cable |